DJI UAV take off operation tips

DJI UAV take off operation tips

Take off

Holding the remote correctly with both hands is the first step to start flying, you need to press your thumb over the stick and not leave the stick during the flight. Place the index finger on the button and the dial wheel above the remote control, and hold the rest of the fingers firmly on the back of the remote control.

Manual take-off: Use the splay lever to unlock the motor. The specific method is to tilt the left and right rocker at the same time to the inside or outside 45 degrees to the limit area, the drone motor starts, the left and right rocker slowly back to the center, the left rocker directly push up about one-third of the rod, and visually take off the drone to a height of more than 2m, confirm that it is higher than the human head, ready to operate.
Back to blog